Click here to return to LAND home page
L-IR Korea Home

시멘트 공정
LAND have supplied the Cement Industry and OEM's throughout the world with temperature measuring equipment for 60 years. All our products are designed to the highest standards of quality and reliability to ensure accurate measurements under plant operating conditions.

The schematic diagram below illustrates typical features of a cement works. The areas highlighted offer measurement reference points and offers the best choice of instrument, where LAND's infrared thermometry know-how can really benefit you. If your specific area of concern is not covered here, our engineers will be pleased to discuss your requirements with you.

If you would like more detailed product information please use the Literature Request page.

 
 
Quick Links
 
   
 
Literature Downloads
 
 
A range of PDF downloads is available for these products >>>

 
   
A Literature download on the Mineral Processing Industry is available
Last Modified (12/07/04) 369KB.
Mineral Processing Rotary Kiln Burning Zone Temperature Kiln Shell Temperature Rotary Kiln Product Temperature Clinker Temperature Clinker Temperature Clinker Temperature
Top of page1 - Kiln Shell Temperature
Kiln Shell Temperature   The early detection of ‘hot’ or ‘cold’ spots is vital to avoid costly maintenance or an unplanned shutdown. Continuous monitoring of the kiln shell along its length day and night will provide the earliest possible indication of potential problem spots.

Recommended Systems:-
Land Kiln Shell scanning system (LSP)
On-line infrared thermometer System 4 - M1
Portable Thermal Imager
On-line Thermal Imager - FTI6

Top of page2 - Rotary Kiln Product Temperature
Rotary Kiln Product Temperature   Sighting tubes of different lengths are installed in various kiln positions - the radiation thermometer accurately measures the temperature at the end of the tube once very kiln rotation. Depending on the thermometer location either the solids (for product quality) or the gases (for kiln efficiency) within the kiln can be measured.

Recommended Systems:-
On-line infrared thermometer System 4 - R1
Top of page3 - Rotary Kiln Burning Zone Temperature
Rotary Kiln Burning Zone Temperature

Rotary Kiln Burning Zone Temperature
  Measurement of the temperature in the kiln burning zone is vital for maintaining both product quality and kiln efficiency.
A 2-colour (ratio) thermometer is used to overcome the inherent problems of dust etc. which obscure the thermometer sight path.
This system can be applied equally to both wet and dry processes.

Recommended Systems:-
On-line infrared thermometer System 4 - R1
Stand alone infrared thermometer UNO - V1
Top of page4 - Cement Clinker System Temperature
Cement Clinker System Temperature

Cement Clinker System Temperature

  To safeguard against either fire or belt burn out the clinker in the bucket elevator must be sufficiently cooled prior to reaching the rubber conveyor. A thermometer used in a closed control system monitors the temperature of the clinker before it reaches the conveyor. This system sets the cooling levels and improves operating efficiency.

Recommended Systems:-
Conveyor Protection System
On-line infrared thermometer System 4 - M6
On-line infrared thermometer - RT8A
Stand alone infrared thermometer Solo 3
Top of pageCopyright © 2006 AMETEK Land, Inc.     All rights reserved     Infrared Site Map     Information updated: 21-Jul-2006