Click here to return to the LAND home page
L-IR Korea Home

LSP-HD Mountings & Accessories
mounting The following information is intented as a guide to the extensive range of optional mountings and accessories available to ensure that you get the best possible service from the investment you have made when specifying LSP-HD infrared linescanning systems to monitor and control your manufacturing process.

For specific recommendations on the choice of protection housing, mounting assemblies, water cooling, air purging and cabling requirements to suit your specific industry or installation, contact Land Instruments International for further advise before ordering.


 
  Quick Links
 

LSP-HD Overview
LSP-HD Heads
LSP-HD I/O Processor
LSP-HD WCA Software

  Literature Downloads
 

LSP-HD Overview
LSP-HD 10 Series
LSP-HD 20 Series
LSP-HD 50 Series
LSP-HD 60 Series
LSP-HD 71
LSP-HD I/O Processor
LSP-HD WCA Software
LSP-HD Mountings and Acc

   
 
Basic Mounting Plate
Right Angle Mounting Plate
The Basic Mounting Plate is used in applications where an LSP-HD Linescanner head is to be installed in light industrial environments where the ambient temperatures is within the recommended operating range of the instrument and the atmosphere is relatively free from dust and airborne particles.

The basic base plate provides a quick release mounting arrangement for the scanner, making realignment a simple and easy operation.
    Water Cooled, Air Purged Base Plate
Basic Mounting Plate
The Water Cooled, Air Purged Base Plate is used in applications where an LSP-HD Linescanner is to be installed into environments where the ambient temperatures are in the range of 60 to 100 C / 140 to 212 F. It is ideally suited to general industrial applications.

The air purge facility should be utilised where the operating environment is dusty and airborne particles could contaminate the scanner viewing window. The plate provides a quick release mounting arrangement for the scanner, making realignment a simple and easy operation.
    Right Angle Mounting Plate
Water Cooled, Air Purged Base Plate
The right angle mounting plate is a simple design intended for basic LSP-HD Linescanner Head mounting.

It is designed for wall mounting and is pre-drilled to accept either the Basic Mounting Plate or the Water Cooled, Air Purged Base Plate.

All fixings are supplied with the plate.
             
             
Enhanced Water Cooled Mounting System Water Cooled, Air Purged Base Plate With Sides

The Water Cooled, Air Purged Base Plate is used in applications where an LSP-HD Linescanner is to be installed into environments where the ambient temperatures are in the range of 60 to 120 C / 140 to 248 F. It is ideally suited to general industrial applications.

The air purge facility should be utilised where the operating environment is dusty and airborne particles could contaminate the scanner viewing window. The plate provides a quick release mounting arrangement for the scanner, making realignment a simple and easy operation.
    Light Industrial Housing

LSP Floatline Mountings

The Light Industrial Housing is used in applications where an LSP-HD scanner needs to be enclosed for additional protection due to airborne particulates. It can be installed into environments where the ambient temperatures are up to 150 C / 302 F.

The air purge facility should be utilised where the operating environment is dusty and airborne particles could contaminate the scanner viewing window. A quick release mounting arrangement is included for the scanner, making realignment a simple and easy operation.
    Heavy Industrial Housing

Ruggedised Enclosure

The Heavy Industrial Housing is used in applications where an LSP-HD scanner needs to be enclosed for additional protection due to airborne particulates or for outdoor operation.
It can be installed into environments where the ambient temperatures are up to 150 C / 302 F.

The air purge facility should be utilised where the operating environment is dusty and airborne particles could contaminate the scanner viewing window. A quick release mounting arrangement is included for the scanner, making realignment a simple and easy operation.
             
             
Blowers

LSP Floatline System Service Panel

The Plate Mounted Blower unit provides air to the LSP-HD. Each specific application may require a controlled air supply. Optical air purging may be required in order to maintain a clear sighting window.

Each blower can support up to two scanners.
    LSP-HD Industrial Power Supply

LSP Mini Services Panel

This is a DIN rail mounted power supply unit for fitting inside cabinets.
    LSP-HD Industrial Power Supply
in a Terminal Box

Plate Mounted Blower Unit

This is a terminal box which allows connection of the incoming LSP-HD connection cable via an M12 industrial Ethernet port, incoming mains power and the downstream data connection via either CAT 5 / 6 cable or multi-mode fibre optic. sight path to the target.
             

The following Landscan literature downloads are available:
Brochure on the LSP-HD Overview
Datasheet on the LSP-HD 10 Series
Datasheet on the LSP-HD 20 Series
Datasheet on the LSP-HD 50 Series
Datasheet on the LSP-HD 60 Series
Datasheet on the LSP-HD 71
Datasheet on the LSP-HD I/O Processor
Brochure on the LSP-HD WCA Software
Brochure on the LSP-HD Mountings and Acc


If you would like more detailed product information please use the Further Information page.
Copyright 1998-2017 Land Instruments International     All rights reserved     Site Map     Information updated: 30-June-2017